VOICE COMMON
CONTROLLERS MIDI control assigns
After-touch bend range + per-destination modulation/bias assigns (pitch / amp / filter / pan / cutoff / EG / volume): each picks a MIDI controller (CC#, 121 = after-touch) and a range — Table 1-3.
ELEMENT 1–4 per voice
Per-element common (Table 1-4): level, detune, note shift, pan, note/velocity limits, micro-tune switch, output selects. AFM vs AWM engine per element is set by Element Mode (Voice tab).
DYNAMIC PAN Table 1-11
Pan source (velocity / note / LFO) + depth and a pan EG. Pan-name + full pan-EG levels expand later.
AFM = 6-operator FM, 45 algorithms, 16 waveforms/op. Select the element (1–4), then per operator: freq, wave, output level, full 4-stage EG (rates/levels/release/hold), level scaling (breakpoints + offsets), rate/velocity scaling — Tables 1-6 & 1-7. Free-algorithm oscillator routing (ALGNUM 127) is the remaining advanced block.
AWM2 = PCM sample playback. Select the element (1–4): wave source/number, frequency mode, pitch EG, multi-LFO, and the full amplitude EG (rates/levels + level-scaling breakpoints & offsets) — Table 1-8. Sample filter lives in the FILTER tab.
Dual dynamic filters per element (AFM filter 1/2 + AWM filter 1/2). Each has type, cutoff, mode, a full filter EG (rates/levels/release + scaling), and cutoff-level-scaling breakpoints + offsets; resonance / velocity / cutoff-mod are filter-common — Table 1-10. Pick the element below.
TG77 dual-chorus + dual-reverb (Table 1-9). Each unit: type (0–4), balance, output level, and 4 (reverb 2: 2) per-type parameters; plus stereo mix 1/2. Effect-type names + per-type Param 1-4 meanings are representative — the booklet gives counts, not labels.
MULTI MODE 16 parts
Per-part on/off, voice bank + number, volume, tuning, note shift, pan (Additional Multi, Table 1-14). Enable Multi Mode on the synth.
Drum-set voice (Element Mode = Drum Set). Pick a drum key (C2–C6): wave source/number, level, tuning, note shift, pan, alternate-group and individual outputs — Table 1-5.
MICRO TUNING 128 keys · memory 1
Per-key fine tuning (0–10794) for user micro-tuning memory 1 — Table 1-12. Knob label = note name; pitch-table name editing comes with bulk dump.
Program Change Table — maps each incoming MIDI program (1–128) to a voice or multi (type + number). Active when System → Prog Change Mode = Table. Frame: F0 43 1n 34 0F 00 N1 N2 00 V2 F7 (Table 1-15).